...transducer. Look under the hull where the traducer is mounted and look for a part that has no obstruction including saltwater pickups, hull relieves, etc. The other thing to check is to take a strait ...
Question about Gsd 21 Sounder Blackbox Fishfinder Module
hull Mount Transducer (200/50 kHz, 12/45 deg) 010-10327-00 Thru-hull Mount Transducer with Depth and Temperature 010-10194-01 Bronze, Thru-hull Mount Transducer with Depth and Temperature 010-10182-01
hull? Hi! This transducer requires a hole to be drilled in the bottom of the hull and the unit installed from the outside, using a caulk/adhesive such as 3M 4200 or 5200. Nice choice. Furuno is a good
Question about 520 5psd Plastic Thru Hull Transducer 600w
...hull or the bottom of the ribs running along the hull thanks try and mount the transducer at the lowest point on the hull and on the flatest part,, with the direction arrow facing forward.
Question about Qt206hp Digital Depth Gauge With Adjustable In Hull Transducer
...hull transducer or a transom mount transducer are your options here. Just in case you require it, your Owners Manual can be viewed/downloaded at: http://ca.binnacle.com/pdf/Uniden-QT206-manual.pdf ...
...transducer in the storage comparment directly in contact with the hull. In both instances we got a depth reading of between 3 - 3 1/2 ft. Any help is appreciate. Thnaks very much you need to mount it ...
...the transducer is even/level with the hull and tilts slightly down in the back or trailing edge of the transducer. Also try to eliminate a gap between the leading edge of the transducer and the
...easy if your transducer is mounted inside the hull and reads through the hull. Not so easy if it is a through-hull mount. Be sure it is mounted correctly to the hull if it is mounted inside the
Question about HDS5x Fishfinders
...transducer (depending on which one you have) should be mounted to the hull of the boat. If a transom mount, at the back of the boat of course and if a through-hull or in-hull ducer in an area that ...
Question about HDS5x Fishfinders
...transducer mounting (either inside the hull or outside the hull.) 4. (In hull) Turbulence going under the boat (mine quits reading at about 55 mph @ half trim...the boat is lifting so much it causes ...
Usually answered in minutes!
1,678 Questions
1,343 Questions
1,187 Questions
1,096 Questions
889 Questions