HP Laser Jet 4350tn issue I have a LaserJet 4350tn where I work. The printer does not give an error until a print job is sent. The print job does not print and control panel on the printer will either
...tray 2 to lift if the tray doesn't lift than there may be a problem with the lifting motor. remove the right cover assembly and near the center bottom is the motor assembly. insert the tray and check ...
Hp Laserjet 8150. Does not pick up from Tray 3....but the tray does lift Start by pulling out tray 2 and setting it on the floor. Next take out tray 3 and slide it into tray 2. Print from tray 2. If ...
hp laserjet 8150. i have a problem, tray 3 empty, always but have paper in tray 3 CAUSE: This error message indicates the paper present sensor flag in one of the trays does not detect paper in the ...
hp printer error Something is preventing tray 2 to be lifted. Take tray tray out of the printer and check for obstructions preventing lifting of the paper. Switching tray's is possible to ascertain if
...hp printer error 60.02 plz help me. Tray 2 is not lifting the paper. Open the tray and look for obstructions. Remove and reseat the tray. Try switching trays 2 and 3. If that doesn't work, reply back ...
...HP 4014N printer. How do I troubleshoot the problem An error has occurred while the product was attempting to lift the tray designated by XX. Pull out tray 2 and remove most of the paper. Push the ...
Question about 4250dtn Monochrome LaserJet Printer
hp laserjet 4250dtn tray 2 & 3 will not lift Any message appearing? like 60.X ? '*Open 'tray two' check 'open message (if No check switch 102) YES '*remove tray2 lift drive ...
Question about LaserJet M4345 MultiFunction Printer
hp printer hp laserjet m5035mfp The tray lifting error is displayed as 60.02 Tray 2 lifting error. To fix this error, check the surface sensor of the paper tray2 in the Manual Sensor Test 2 menu under
Question about LaserJet 8150 Printer
HP LaserJet 8150 Printer. Why isn't it lifting paper tray 2? Tray 3 works fine. I can't see any problem. Got a new tray to see if it was the problem... got the same result so not the tray itself. ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions