Questions & Answers for: hp deskjet 5150 top cover

top cover is open. I made sure that it is not. I have also unplugged the cables, waited for 2 minutes and plugged them in again. Same problem. Please help ! Has the printer been dropped? The cover has

...hp deskjet d 2360 at the time of attaching the printer with computer , mistekly i placed black &white cartage at the place of colour cartage & vice varsa . now i m uneble to get back the cartage from ...

Top Cover Open I make sure that the top cover closed. I attempted several time deleting the driver and restore but same problem appeared. Thanks had same problem. fixed this way: unplug power cable ...

HP Deskjet 5150 - top cover open Error Message - "Top Cover Open". I keep on getting this message when I want to print even though the cover is closed. my e-mail address : [email protected] I ...

...tab on the top right side, as if the cover was down. I printed a doc while doing this and it worked! Once I released it, the printer continued as normal. Not very scientific but it worked for

HP 5150 Hello, I have an HP 5150 and need to replace the ink. Without forcing the used cartridges out, I can't get them out of the carriage. I have done this before but can't recall how I did so and ...

...top covers notch is brocken you can insert a piece of folded paper on to the printers cover censor, look at the cover and see if you can find a pointed plastic, that is the pointer look where it ...

...HP 5150 Open the cover.In right side you'll see the cover sensor.It's a plastic lever, which does down to the bottom of printer.The top side of this lever usually breaks. Try opening the lid and then ...

...hp 5150 desk jet that won't print. The task manager says "door open" which I see sometimes after I change out the cartridges. However, in this case I didn't. I've opened and closed everything twice. ...

...5150 printer .you just open the top cover ,in your right hand you can see a black moving part it may not working properly. try to move back and forth many time ,then close and check your printer. the ...