Questions & Answers for: Saab 9000 how to reset limp mode

1996 9000 alarm Can I turn off the immobiliser, and just lock the car with the key? yes , unplug the battery and reconnect after a few seconds this set car in shipping mode and alarm off until rearmed

heat/air fan not blowing air out - still feel heat/cold up close but no fan. you need to reset the system on your control panal it or your blower needs to be replaced check the fuses as well

...in limp home mode. you will not be able to fix this yourself as most shops are unable to fix these issues. However the most common problem is the safety valve located on the firewall passenger

1997 900s srs light stays on srs light is on always... just wandering is there is a way to reset it. hi you need tec 2 to reset it as no other tool will do the job

1993 saab turbo CSE. limphome mode, possible head gasket leak 1993 saab turbo CSE. I have a rebuilt engine and I see what appears to be oil leaking out of the engine apparently from the gasket (very ...

need location of reset button for fuel pump on a saab it should be in the trunk area

Where is the fan speed controller located? on the dash where fan mode switch is

My saab 9000 wont start after the battery went flat and I recharged it. It will turn over but not fire. Any ideas ,Dave anti-theft system needs to be reset

have saab 9000 turbo tcs light came on in limp mode how hard and expensive is it to fix this?? YOU WILL HAVE TO RESET IT ON THE THROTTLE BODY,IF IT DOESN'T YOU WILL HAVE TO REPLACE THROTTLE BODY. TIM

how to reset srs light on 94 saab 900s When you say reset do you mean you had the battery disconnected and the light is on due to that or another reason like the light just came on while driving which