Question about DJm 400 Professional DJ Mixer
...the A and B Outputs of the EQ to the power amp/ speakers, etc (you'll need jack or XLR cables depending on what is powereing your speakers) i dont know how to connect my speakers to my pioneer dmj ...
Question about Xenyx 1002fx Mixer 10 Input 2 Bus with Efx
mixer to the speakers, Use XLR or 1/4 inch TRS cables. If you do NOT have powered speakers you will need amplifier as well and speaker cables in addition to the audio connection cables above. Not sure
...either XLR or TRS to connect the speakers to the mixer. Power the lights separately. To give anymore suggestions would require a diagram of how your venue is laid out and the location of power,
...connect speakers to this... this is NOT a powered mixer... you MUST use external amplifier !!!! You use bvalanced (TRS) cables to a suitable power amplifier which connects to speakers. Some Behringer ...
...connect them into a power source and turn them on AFTER connecting them. Once powered on you can control the signal going to the mixer with the Main Mix fader. Turn mixer on Ensure Main Mix level is ...
Question about EuroPower EP4000 2Channel Amplifier
...connect to a mixer The rule of thumb is you control your audio on the low side. That means you plug your mics, tuners, audio sources into the pre-amp and then the pre-amp into the equalizer/mixer ant ...
Question about Europower Pmp5000 Powered Mixer Pmp5000
...CONNECT 2 SPEAKERS TO THE MIXER Unpowered (passive) speakers connect to the Speakon connectors on the back of the unit. Powered speakers or amplified ones connect to the mains output L/R ...
Question about TRF152 15 Pro DJ PA Speaker
...speaker (like a JBL eon g2), then all you need is a passive mixer, and connect the speakers to the mixer. If this is not a powered (amplified) speaker, then you will need an amplifier to boost ...
Question about TRF152 15 Pro DJ PA Speaker
...does not have power amplifier outputs for speakers. The red and white RCA jacks are out puts that would plug into a power amp input, and the speakers would connect to the power amp, as in a PA
...speakers to phonic mr3243 mixer You would connect the xlr left and right outputs to a power amplifier and then the speakers to the power amp. The mixer will not drive a set of speakers by
Usually answered in minutes!
297 Questions
192 Questions
155 Questions
161 Questions
136 Questions