Question about 1999 Durango
...housing and axle shaft tubes. Remove housing cover. Rotate differential case so that pinion mate gear shaft lock screw is accessible. Remove lock screw and pinion mate gear shaft from differential ...
Question about 2004 Crown Victoria
axle housing cover with a wire brush and/or cloth. Drain rear axle lubricant by removing the axle housing cover . Remove differential pinion shaft lock pin and differential pinion shaft . Push flanged
axle housing -remove rear axle housing cover (10 or 12 bolts) -turn gear untiil the bolt for cross shaft shows and remov e the bolt -remove the cross shaft. -push axle in until you can remove "U" clip
...axle housing is at suitable working height. Remove axle housing cover from rear axle housing and drain lubricant. Perform the inspection before disassembly. Remove rear wheels, rear disc brake ...
...Axle Housing AssemblyRemoval & InstallationTo Remove: Exploded view of the rear axle mounting Raise and support the rear of the vehicle safely using jackstands under the frame. Position a floor ...
...axle housing for imperfections. These should be corrected with a file or polish. you must remove the rear cover of the rear now is ware it gets hard you are looking at the rear turn the ring gear ...
...axle transmissions are transmissions and differentials in one housing with the axles coming directly out of that housing, its the housing that bolts to the engine with 2 axles coming out. Only in ...
Question about 2001 Stratus
...need this information for if you already have the axle out of the diff housing, just pry the old seal out of the housing and install the new one no need to remove the axle tube ( diff housing at
Question about 2001 Stratus
...axle housing cover and the gasket. Refer to Rear Axle Housing Cover and Gasket Replacement. Remove the pinion shaft locking bolt. On axles without a locking differential, remove the pinion shaft. On ...
Question about 2001 Stratus
...housing connected to the rear axle. 2. Identify the speed sensor: The rear axle speed sensor is usually mounted on the differential housing itself. It will have a wiring harness connected to it. 3. ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions