Questions & Answers for: Whirlpool hot water trickles washer

...for the hot and the cold water. Depending on your water source and the age of your plumbing, you could have sediment collecting and blocking these screens. Check and flush before you do

...Hot water (only) trickles When selecting hot water to wash, the hot water only trickles into the tub of the washer, taking almost 20+ minutes to fill. The other temps choices work OK. Please advise. ...

hot water is ok. Also not agitating to well. Bottom agitator seems ok so if i do a small load it's not a problem. Large loads don't get agitated well. sounds like you have checked the water coming out

...Duty Whirlpool top load washer when I wash in cold water the water trickles out, when I change it to hot/warm it works fine, pouring out strong. Help, I need cold for my colors. water control ...

...is off. If to open the door, the floor will be flooded your inlet vaulve is sticking and allowing water to trickle through, only solution is to find if it is your hot or cold vaulve and replace ...

...hot water works fine. Please let me know what the problem could be. Regards, Habib The hot and cold water supply hoses that connect the washer from the water supply faucets on the wall to the water ...

...water (hot&cold) to the machine yet, the cold water trickles out on any cold setting. The hot water has great flow. What could be the answer? Sounds to me like your inlet valve is gunked up. You ...

hot water. If the problem switches order a water inlet valve which is about $20.00. To replace the valve turn off the water and unplug the unit. Pull the unit out and remove the back panel. Disconnect

...hot and cold. When water is called for the solenoids get energized on the water valve and them plungers get snatched open. When the power goes off the water pressure and springs snap the plunger back ...

hot water barely trickles into whirlpool imperial seventy washer hot water barely trickles into washer What is the model number?