Questions & Answers for: Hotpoint

Question about VBXR1090D Top Load Washer

1 Answer

no hot water I have a hotpoint washer. I can not get hot water to go into the washer. the hot water line flows. I'm not sure if it is the valve or switch. I hate to order the wrong part. Hi, Some ...

Ad

Question about VBXR1090B Top Load Washer

1 Answer

hot/cold cycle works but w/out hot water when i put my washer on the hot wash it will fill up, but only with cold water. is the hot water generated by something in the washing machine or from my house

Ad

Question about VBXR1090B Top Load Washer

1 Answer

which is the hot water side to connect the hoses At the back of the washer where the fill hoses from your faucet attach to the washer there should be a marking of an H for hot and C for cold. Test ...

Question about WMA58 Front Load Washer

1 Answer

only takes on cold water will not take on hot when you disconnect pipe hot water runs through so supply is ok If it is a hot and cold fill washer with 2 seperate inlet hoses, and no hot is entering, ...

Question about 24 in. FDW60 Free-standing Dishwasher

1 Answer

is the feed pipe a hot or cold feed? i am installing the dishwasher and am not sure if the water feed is hot or cold. Connect the dishwasher to the HOT water side. Although most dishwashers have a ...

Question about TDC32 Electric Dryer

1 Answer

Hotpoint Dryer has burning smell, checked vent--ok,checked screen just inside--ok. Drum turns. Four screws on back with depression space are extremely hot. Hi, The cycling or operating thermostatis ...

Question about NVL333EY Electric Dryer

1 Answer

when the dryer is running top of dryer where controls is hot to the touch Hi, The cycling or operating thermostatis often the problem when a dryer runstoo hot, but there are also other things that can

Question about NVL333EY Electric Dryer

1 Answer

Dryer heats too hot instantly. Ok on cool down or blower only cycle. All vents are clean. Hi, The cycling or operating thermostatis often the problem when a dryer runstoo hot, but there are also other

Question about 18 in. BCI45 Slim-Line Built-in Dishwasher

1 Answer

no hot water in dishwasher cycle the dishwasher goes through its cycle but no hot water seems to have been used If the program chosen contained the HOT WASH but there was not execution then the fault ...

Question about WMA48 Front Load Washer

1 Answer

Water does not get hot on a hot wash Shut off the water. Disconnect & check the BOTH water supply hoses at the MACHINE to check for obstructions / kinks / etc: Check for and clean any strainer / ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machine Experts

vince

Level 3 Expert

2530 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...