...steering wheel to check the wiring from the button It looks odd to me with just a wire to the contact pad without any picture of a closed circuit. And I have wiped off rust on the surface of the ...
...and make sure the wire is conected, and intact. Hope this helps, Good luck! tahe the steering wheel out and attemp to short the brass spring sonnector to ground. if the horn works that is the ...
steering wheel, or fuse, but usually horn fuse works other things too such as cig lighter or radio. If everything else is working fine, then to troubleshoot you'll need a testlight. I would start with
my horn on my toyota pickup work some time.why.1991 1) the horn button on the steering wheel. 2) the horn relay 3) the horn itself 4) damaged wiring
...STEERING WHEEL, THERE MAY BE A WORN BRASS CONTACT STICKING UP. PUT A WIRE FROM THAT CONTACT TO SOME METAL UNDER THE DASH, IF THE HORN WORKS YOU WILL HAVE TO WORK ON THAT CONTACT OR MAYBE THE HORN ...
...buttons on the sterring wheel check the power to the horn with a test light.have someone push the horn button and look for power at horn.next listen for a click sound it will come from the horn relay ...
...steering wheel you look at. generally there will be two screws and then a couple of snaps, pull it off and pull off the connectors for the horns switch. you will not be able to find a new one, and a ...
steering wheel has a little pin that rubs up on a metal disk, and this pin and disk are what supply the battery voltage to the horn button on the steering wheel. I can see a small gap between the two.
Question about 1986 Pickup 4WD
...the center plug from the steering wheel and check the circular contact ring and tab. The ring can build up gunk and also wear through, then not make proper contact with the horn button contact
Usually answered in minutes!
914 Questions
745 Questions
525 Questions
407 Questions
393 Questions