Questions & Answers for: Chevrolet Cobalt horns buttons steering wheel working

...steering wheel lock doesn't work. You can turn the steering wheel freely in either direction Is the steering lock a anti theft feature, is it really needed or should this be fixed, and if so, how? ...

...steering wheel is turned to hard to left or right, lightly turn away from the left or right to remove key. if not shake steering wheel like mad to the left and right and turn key and remove. try ...

...buttons on the steering wheel work. Sounds like you have faulty clock spring, it is located under steering wheel and allows for a rotating electrical contact for the airbag, horn (in many cases) and ...

to relieve pressure on steering wheel by turning steering wheel opposite direction from the tightest position or what ever it takes to relieve the pressure on the steering mechanism. this "might" help

...buttons wont work. if i replace it with an after market stereo will my steering wheel controls work? With A/C your problem is condensation, you may have an A/C tube that has damage or a small cut ...

...steering wheel wouldn't move and I couldn't push the brake pedal down. After trying several times to turn the steering wheel or the key - it finally turned in the ignition and started. What did I do ...

...steering wheel is locked, it is stuck in park, the wheels are almost straight, and the E brake is off. Hi, what you need to do is put the key in the ignition then grab hold of the steering wheel then ...

...steering wheel but not the horn. thanks, irving The horn(s) are buried behind grill. You have to disassemble grill and a ton of hardware by AC condenser and fans. Horns are mounted on front side of ...

...in the on position. Any suggestions other than taking it to the mechanic? Have tried turning steering wheel, moving shifter, brake pedal, pushed white button under steering column cover.

...steering wheel comes off ! does it just pull off . i replaced the horn,and i took a 12volt test light and tested the fuses. and they were good,but im not getting 12 volt to the horn.so i need to no ...