Questions & Answers for: hood latch not closed

...hood latch and the hood is down I was checking the oil and tried to close the hood. It would not close completely, though the initial latch did engage it would not close completely. I did remove the ...

...hood latch ( to the left and right of the unit) there are two mounting screws that actually hold the hood latch piece together. If those screws are loosened the latch can be moved left and right. ...

...hood latch sometimes the hood adjustment for the latch is too tight, pull the hood latch, go out to the hood and press down on it at the latch location, push hard and release quickly, then adjust the ...

hood.in side latch is fully up, no pop on hood. hood is locked tight I am not familiar with this particular car, however MANY times I have opened a hood by having one person hold the lever up (or out)

...latch. the hood latch is out of adjustment loosen three bolts and pry latch up retighten bolts also check cable isnt stuck in the open position spray with lube my mama had this exact same model with ...

...latch of hood, is tight and secure(no loose bolts) also check cable if broken. only those things can cause hood to pop open. if all visual inspections check out and still continues to open while ...

keeps the hood down when driving. Is there a way to open the main latch to receive the hood pin? look down at the latch and make sure the cable is returning all the way the latch could be binding 

Hood latch won't latch when closing Hood latch won't latch when closing Raise hood,have some one go pull hood latch and you look at latch and see if it releases,if it doesn't then ...

latch Hood is open and I can't get it to relatch see if you can tighten the cable. Or your latch is bent. their is a primary latch and a secondary latch. the primary is what hold the hood closed tight

...hood latch Close the latch with the hood open to make sure it works. If it does make sure the hood release handle,is in all the way and adjust the latch assembly have some one operate the handle as ...