Questions & Answers for: hood align

I have a 93 dodge van and the hood release is not letting me release the hood. It is extremely loose. How to get a better look at it or is it something that can be tightened There are a couple of ...

Hood wont close 2004 saturn ion hood wont close all the way the alignment must be off...are all the seams on the side equal? Has someone sat on or bumped the hood? Can you see what's hitting? Is the ...

...a different senerio,put the bolts on almost tight but a little loose,enough that when you close the hood(gently) the hood and the bolts will align together.pop the hood and lock down the bolts

my hood on my jeep liberty will not complety shut? the only thing holding it down it the saftey latch. Look at the hood alignment to make sure it's aligned properly and allowing the latch to catch. If

...align the hood latch on a 2001 f150? should the "hook" on the latch be centered on the striker bar that is attached to the hood itself? leave the striker plate loose(ish) when you lower the hood and ...

Dash indicator says "Hood Open" Dash indicator says "Hood Open" . Found possible 2 problems. Hood not aligned ,or defective hood latch "SWITCH". Where is this hood switch located ?

hood latch attaching bolts. Move them as necessary to align with the latch dowel. Tighten the attaching bolts. Remove the locknut on the hood latch dowel, and turn the dowel clockwise to pull the hood

Hood alignment Hood hits fender on passenger side . Is there's adjustment I can make for this ? try adjusting the hinge at the base of the bonnet. Loosen the bolts slightly and lower the bonnet till ...

Can't close hood on 2007 Subaru forester Try pulling the latch lever again. Sometimes, when the hood alignment isn't quite right, the latch will lock before the hood end gets in the right place. ...

...I need to align the hood on my 98 sable. The fender gaps are not the same on both sides. How do I go about making this adjustment? loosen the 4 bolts that hold hood to hinges located on back of