Questions & Answers for: Janome hold my hand

Question about 2049LX Mechanical Sewing Machine

1 Answer

The Reverse stitch button My sewing machine is stitching in reverse without holding the reverse stitch button down...I can't get it to sew in the correct direction The feed mechanism needs to be oiled

Ad

Question about 2049LX Mechanical Sewing Machine

1 Answer

...hold hand wheel just crack in order to move suddenly after oiling for several hours sometime bushing and shafting rushes emerged or if you have anti rush spray put in on.After cracking and you can ...

Ad

Question about 6019QC Mechanical Sewing Machine

1 Answer

...hold top thread with your fingers( away from the needle) then with your other hand turn the handwheel slowly on the right side of the machine & let the needle down into the bobbin area & see ...

Question about 6019QC Mechanical Sewing Machine

1 Answer

...tug. Janome also puts tabs on the side cover to help hold it on, and they do stick sometimes. If you can get your whole hand over the entire cover, get a good grip on it, and just give it firm

...hand online and 1 of the spool pins are broken off. What was the purpose of the 2nd one and where can I find a replacement? they are only used if your sewing with double needles to hold the other ...

Question about Memory Craft 3000

1 Answer

...doesn't move at all sounds as though the hand wheel at the right end of the machine needs tightening by hand to engage inner workings. Hold the larger wheel with one hand tighten the smaller

Question about Hello Kitty 15822 Heavy-duty Aluminum 22-stitch Sewing Machine color - white with red trim

1 Answer

...slowly rock the hand wheel. use tweezers or small pliers to hold needle and gently twist/pull as the wheel is rocked. The needle will loosen and come out with patience, use as little force as ...

hold the hand wheel and turn the stop motion knob, but they don't seem to move independently of one another. Could it be stuck? How do I fix that? it could be in the memory board I would take it in to

Question about Hello Kitty 15822 Heavy-duty Aluminum 22-stitch Sewing Machine color - white with red trim

1 Answer

5. Replace bobbin. (Wipe oil if there is any.) 6. Remove oil from the needle arm. (Goes up and down holding unto the needle.) 7. Replace a small amount of oil on the needle arm. The sewing the machine

Question about Hello Kitty 15822 Heavy-duty Aluminum 22-stitch Sewing Machine color - white with red trim

2 Answers

hold the end of the top thread in your left hand and slowly rotate the handwheel toward you with your right hand. The needle will go down and it should come up with the bobbin thread. I use a stiletto

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Janome Sewing Machine Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Kolbrun...

Level 3 Expert

1228 Answers

Are you a Janome Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...