Questions & Answers for: Chevrolet hinge

Question about 2001 Silverado

1 Answer

door hinge My driver's door seems to be sagging and I need to adjust it in order to get the door to seal properly. What do I need to adjust? The door is bolted to the hinges, work out which hinge has ...

Ad

Question about 2004 Express

1 Answer

...van. Rear door just as stiff as a board. Very hard to close. Have tried spraying entire inner hinges with WD40 but still it remains stiff. Any other suggestions. Thanks in advance. I have the ...

Ad

my problem is that the upper door hinge on my 2001 silverdo is bad i need too know how to remove the old factory hinge to replace it. Most likely the hinge is not bad, but the hinge pin bushings are ...

I have installed new upper and lower hinges for my 99 Cavalier. The bushings were worn on the old hinges. I have having trouble adjusting the door to shut properly. Should I use a shim? It seems ...

...R/V Series See Figures 1, 2 and 3 If the door being removed is to be reinstalled, matchmark the hinge position. If the door is to be replaced with a new one, remove the trim panels weathersheets ...

How do you change the bottom door hinge on a 02 silverado divers side Before you start if your new hinge isn't painted you should do so to keep it from rusting. Open the door all the way then you need

there is a clicking noise in the driverside door hinge It is most likely a loose hinge bolt that allows the hinges to move around when the door is opened. you need to replace the hinge it self

door saggs on my HD3500 work truck Sounds like your hinge pins are wearing out. You can get a hing pin and bushing set either at the dealer or any auto parts store. You'll need a jack and a block of ...

...the door and disconnect the wiring loom connector. -Unbolt the door check strap bar between the hinges. -Support the weight of the door and locate the hinge bolt on the door. -Loosen, but do not ...

1996 Chevy S10 pickup. How too replace the upper door hinge? The door has came off. I have too replace the old hinge on upper drivers side? Can I buy a kit? I do have a welder. Do I grind the old one ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...