Questions & Answers for: Chevrolet Impala high

my high beams are on and i dont know how to turn it off The high beam is normally turn on and off by the control arm on the left side of the steering wheel, just pull it slightly back and you should ...

my high beam head lights do not come after pulling handle My high beam head lights do not come on, after replacing the high beam with new bulbs.a sales person at an auto store told me if you do not ...

Both low beams do not work. High beams do work Both low beams do not work. High beams do work check fuses for low headlight fuse blown highly unlikely both bulbs went out at once.

I have a 2005 chev impala can i replace my high beams headlights with just low beam lights NO YOU HAVE TO REPLACE HIGH BEAM LIGHT BULBS WITH HIGH BEAM LIGHT BULBS BECAUSE HIGH BEAM LIGHT BULBS AND LOW

high idle then low idle On cold start engine idles high then low then high then low for about one minute then idles rough. just do induction / throttle body cleaning - will solve high idle on start up

stuck in high idle was driving home and car seemed to be idling real high as soon as I left off brakes car would take off. got home and restarted was stuck on a high idle Check in side by throttle ...

High beam/DRL light wont work Drivers side high beam/DRL not coming on. Replaced bulb still no go?? Is there two bulbs? High and low beam.

How do we lower the idle in a 2003Impala sedan? And how do we fix light inside console for high beam. Haven't tryed anything yet.The idle is to high,have to leave my foot on brake when on a stop light

...?€¢ Windshield wiper/washer switch ?€¢ Body control module (BCM) ?€¢ Wiper PCB relay ?€¢ Wiper high PCB relay ?€¢ Windshield wiper motor ?€¢ Windshield washer fluid pump ?€¢ Windshield washer ...

2010 impala high beams do not come on, light on dash comes on, replaced bulbs still don't work, checked all fuses, look good High Beam Headlamp Operation Battery voltage is applied at all times to the