Questions & Answers for: Chevrolet high

4-wheel high problem Hi there, I have a '98 Chevy Blazer and it won't lock into 4-wheel high. I do have 4 wheel low, though. When the problem was first starting, it would jump out of 4 high into 2 ...

its reversial for me my high beams wont work what I took it in to be inspected and thats when they told me that the high beams didnt work they took the bulb out of the drivers side and they told me ...

a/c blows hot air at idle the engine fan will not kick into high speed and therefore the pressure on the low side of a/c goes up to 75psi at idle. i have already swapped out the relay that controls ...

...Caprice Heat/ Ac blower speed control troubleshooting fan speed control went out and all i have is high speed on my AC. Now the high speed only turns on sometimes. (The Heat/AC fan setting. 1-Low, ...

Headlights will not come on but if I hold the high beam switch the high beams come on. What could be the problem? the headlight switch sends power to the highbeam switch which controls both low and ...

no high beams If the flash to pass function makes the high beams come on, then the high/low beam switch needs replaced. There is a high-beam relay in this car that controls when the high beams come on

have replaced both blower motor and resistor but fan does not work on high The resistor handles everything but high. High gets power from the high speed relay.

how to correct a 2005 chevy monte carlo high beams from staying on high beams in a chevy monte carlo wont shut off About 17,700 results (0.74 seconds) Search Results My high beams won't go off!! - ...

What would be some reasons my high beams don't work in my 2009 hhr? we have changed the fuse (relay), the dash lights are working. COULD BE FUSE MAYBE RELAY OR HEADLIGHT SWITCH. You need to know how ...

2010 impala high beams do not come on, light on dash comes on, replaced bulbs still don't work, checked all fuses, look good High Beam Headlamp Operation Battery voltage is applied at all times to the