Questions & Answers for: Chevrolet Astro hesitation

Question about 1997 Astro

1 Answer

I have a 2000 astro van awd. 1/2 the time there is a hesitation upon acceleration and sluggish, like it is being held back. I had it checked out at a chev dealer and everything is ok. sometimes it ...

Ad

Question about 2000 Astro

1 Answer

98 Chevy Astro van AWD bucks & extreme hesitation on initial acceleration. There are no codes in the computer & check engine light is not on. We replaced the spark plugs, wires, distributor ...

Ad

98 Astro Van,when warm hesitating, stalling I have a 1998 Chevy Astro. Runs great until it gets warm then it starts hesitating whenever you take off or turn a corner (want to make sure you have plenty

92 astro 4.3 stalls backfires hesitates i have a astro 4.3 giving me fits ive replaced the cap rotor wires plugs fuel pump not any results. has no power skips under a load backfires any help please i ...

1996 Astro AWD 4.3L V6 308,000Km engine hesitation/surging 1996 Astro AWD 4.3L V6 308,000Km I have a hesitation or fuel surge problem. What are the likely causes? Symptoms: when in drive and ...

Question about 1994 Astro

1 Answer

engine was maybe miss firing around 45 mph running rough hesitating one day then fine the next now wont run at all sounds like its getting no gas Check for stuck open EGR valve or a bad MAP sensor.

Question about 1994 Astro

1 Answer

okay have changed out the oil and filter,plugs, wires,ditributor,rotor, and fuel filter on occassion as it gets over 40 miles per hours it starts to intemittently hesitate/ **** slightly we dont seem ...

...fine again for a f It started to leak fluid near the transmission, but it shifts just fine, no hesitation. The transmission fluid level is fine. I checked the brakes to see if they were seizing, ...

why does my 2000 astro van hesitates after putting gas in it? After putting gas in my 2000 astro van its very slugish when taking off, when i put my foot in gas pedal it has almost no response... ...

2000 chevy astro van 4.3 v6/I changed dist.cap 4 times in 1 year rotor too/runs rough,hesitation,bad ildeing,could it be dist.gear /shaft are worn/got code po300 code p 0300 is random/ multiple ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...