...vacuum operated heater valve located on the engine side of the firewall. This black plastic valve has a vacuum line to it as well as hot water inlet hose from the cylinder head and a heater by pass ...
...vacuum lines to heater unit they sometimes come off or it may have 12v motor that has failed also if its cable opperated may have broken cable to blend door your heater core or control valve is ...
...vacuum at the heater control valve when the lever is in the HOT position. If there is no vacuum, then you have a problem with the heater control panel or vacuum supply. If you do have vacuum, then ...
heater.html Vacuum valves are installed in the event the water main is depressurized for maintenance thus possibly creating a vacuum situation within a home and possibly damaging pipes or water heater
Question about 40 GAL ELEC TALL Water Heater 6YR SC 82VH402
...vacuum TO the ac/heater climate control switch in the dash? Have been looking for a vacuum leak. Found one in the engine compartment at the throttle body but no others in the engine bay. Van still ...
...heater , check the vacuum actuator hose for leaks ( replace that vacuum hose is what i would do ) if you replace that vacuum hose and still getting zero heat output from the heater core . then the ...
...heater controls. A vacuum line from the engine is also there, the pod will send the vacuum signal out to various doors on the heater/AC case, as the controls demand. One also goes to the heater ...
Question about 40 GAL ELEC TALL Water Heater 6YR SC 82VH402
...or to the defroster. A leak in the tubing, ball, or motor can cause the door(s) to retract to default if vacuum drops down as it does at idle. Have the heater box and vacuum system to it checked
...heater vacuum air flow shutters son't move unit is stuck on defrost mode and will not change. AC and heater work but all air goes to windshield Taking your heating box apart may be a really big job. ...
Question about 1991 Dakota
...vacuum-actuated heater control valve (water valve). The heater control valve closes when vacuum is applied to it. The A/C switch is closed when the lever is in any of the A/C modes (MAX, NORM or ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
