Questions & Answers for: Saturn heater cable

...cable and vacuum control line. Remove the heater core bracket and clamps. To install the new heater core, reverse the removal steps. Core leaks **** because of the core's location deep within the ...

...heater control will have to be removed and possibly disassembled to get at the bulb. 1995-98 Models Disconnect the negative battery cable. Remove the radio/HVAC controller cover by depressing the ...

luke warm heat The temp slider moves a cable which opens and shuts a door on the heater box to let outside air in. either that has gone south, or you need a new heater core.

luke warm air heater not working properly the mixture or blend flap cable operated by the temp slider is bad or the heater core is plugging up

cable connections are good then you are going to have to get at the other ends of the cables in the heater box. if you are going to do that then replace the core while you are in there. do a search on

...heater coolant hoses. Remove the cable and/or vacuum control lines (if equipped). Remove the heater core securing brackets and/or clamps. Lift the core from the case. Do not use force. Take care not ...

...heater coolant hoses. Remove the cable and/or vacuum control lines (if equipped). Remove the heater core securing brackets and/or clamps. Lift the core from the case. Do not use force. Take care not ...

...heater inlet valve. This valve is usually next to the firewall on the engine side and is activated by cable(s) or vacuum lines. It is common to find that the valve cables have frozen, the cable ends ...

...check for air blowing out where it should not, or the blender door is not opening, a cable sheath may have popped loose, or the heater core itself is clogged with leaf debris blocking air

...hoses going to the heater core one has a tap or valve to regulate the water flow, this may be jammed closed or the control cable has come off. also check the thermostat if the engine is running