Questions & Answers for: Mazda heat pump stops and starts

...stops for no apparent reason. Sometimes it starts again almost immediately, at other times it will not start for at least 30 minutes. It is serviced regularly and this intermittant fault is extremely ...

...heat but not to hot replaced, water pump and thermal stat.now there seems to be a air lock in the motor cannot find a bleeder to let air out is there one?Car over heats not as fast and have not heat ...

My car mazda eunos was over heated , then just stop . I check the following: time built[okay],changed with second hand the computer box ,fuel pump and nozzle injector but same it can not start. what ...

...PUMP OR INJECTOR.VACUUM LEAK.SCAN THE CAR IT WOULD SAVE YOU TIME AND MONEY. try replacing the coils, plugs and wires Flooding seems to be a common problem with the RX8 engines. The spark plugs are ...

...having to pump the pedal,, doesn't help with this problem,, and the over heating is more than likely associated with it too,, if its not firing correctly, it will tend to over heat at ...

...heat pump, or water pump? 1988 b2200 is overheating--we've changed out the lower radiator hose, thermostat, and the upper hose is fine. Why is it overheating? Radiator, heat pump, or water ...

...pump stops sucking it could drift away from the pickup and the engine starts but when the pump starts sucking again it picks up the blockage again. Failing that it could be the computer control box. ...

ok so help me out. my 03 mpv is over heating my girlfriend ran it without oil till it stopped on her. i put oil and coolant back in it and also found the reservoir had a huge crack in it. it started ...

...pump module locking ring, hold the O-ring while turning the locking ring until it stops against the retainer tabs.To install, reverse the removal procedure. Start the engine and visually inspect for ...

...pump pulley, 3 alternators. My car is still breaking belts. Its breaks the most belts in the winter when I cut on the heat. Now its starting to break belts on a weekly bases. Replace belt tensioner, ...