Questions & Answers for: Suzuki Forenza headlight assembly diagram

Question about 2005 Forenza

4 Answers

...headlight assembly How do you remove the headlight assembly there is a nut on the left side of the light on drivers side,just the opposite on passenger side. you will need a deep socket. there are 2 ...

Ad

Question about 2005 Forenza

5 Answers

...headlight switch. stuck to high beam. would not release to switch to low beam. tnx 4 using fixya, drcool my friend got the same problem with the 05 forenza, did some researches found some TSBs about ...

Ad

Question about 2005 Forenza

1 Answer

...lid to the fuse box and the lid to the fuse box has the diagram showing what each fuse goes to (ie headlights, tail lights etc.) is there any way I could get a new diagram showing this online ...

...Headlight Assembly on 2004 Forenza I am trying to remove the hadlight so that I can replace bulbs and one of the retaining springs. I have remove the two bolts but cannot get the light to come out. ...

Question about 2004 Forenza

2 Answers

assembly, or near the frame rail by the radiator support. You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows

headlight assembly off, so you will now see the headlight bulb. Take the wiring harness off from the bulb. Take the defective bulb off and put the replacement in. Reinstall the headlight assembly, and

VW Polo 1.3 M Reg, headlights are really dim and the highbeams won't stay/click on, they will flash but wont stay on as they should, headlights are also coming on dim when i start the car without even

...headlight assembly? Thank you for any help you can give me Assembly removal is easy. In fact, because of the problem you encountered--getting that stupid retention spring off, I recommend removal of ...

...headlight assembly on 2004 suzuki forenza There are a combination of 3 nuts and bolts for each side...all are 10mm. Two bolts are on top of the assembly, attaching it to the top of the frame/radiator ...

...headlight assembly. Remove the two 10mm bolts on top of the headlight assembly, pull the whole thing out, mindful that the wires are still attached. Remove the cover to the bulb, unclip the wire ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...