Questions & Answers for: headlight aiming procedure

...HEADLIGHT AIMING CAUTION: Turn off the light before adjusting the headlightaiming. If it is necessary to inspect the aiming, do not turn on thelamp for more than two minutes . NOTE: Before checking ...

2008 HHr headlights aimed too high. It is very obvious that our HHr's headlights are aimed too high.  Everyone hates our dims and the owls are not very happy with our brights.  I was totally

...headlight aiming; these should be checked before adjustment is made. CAUTION About once a year, when the headlights are replaced or any time front end work is performed on your vehicle, the headlight ...

...headlight aiming; these should be checked before adjustment is made. CAUTION About once a year, when the headlights are replaced or any time front end work is performed on your vehicle, the headlight ...

...aiming procedure depends on what type of beam pattern the headlamp is equipped with. To identify the headlamp beam pattern, look on the headlamp lens. Molded in small letters on the headlamp lens is ...

...headlight aiming equipment. On 1992-98 vehicles, the aerodynamically styled headlights necessitate the use of headlight aiming kit 107-00003 or equivalent. The adjustable aimer adapters provided in ...

...headlight aiming procedure later in this section to ease checking or adjustment of the headlights after installation. Disconnect the negative battery cable. Loosen and remove the retaining screws, ...

headlight aimer VAS 5107, using detailed aiming procedure and specifications Low and high beams are adjusted simultaneously. Left headlight (adjustment screws for right headlight are mirror image): 1

...HEADLIGHT AIMING CAUTION: Turn off the light before adjusting headlight aiming. If the light is necessary to check aiming, do not turn on for more than two minutes . NOTE: Before checking the ...

headlight adjustment AIMING The procedure outlined here is intended to provide a basic adjustment only. Park the vehicle on a level surface 25 feet (7.62 meters) from a vertical wall. There must be a ...