Questions & Answers for: Peugeot 405 head removal

Question about 2005 405

2 Answers

...The reason I say this that we have loads of cars into the workshop with glowpugs broken in the head of the engine with the result of us having to remove the cylinder head. What happens is that ...

Ad

...become hot very soon I have a peugeot 405 model 1991 it's engine become too hot just soon suspect head gasket, check rad is hot all over and check thermostat, more likely a head gasket. remove rad ...

Ad

...going to it 1. quick fix first remove the wires to the blower motor undo the 3 brass coloured cross head screw from around the blower motor remove the blow motor and fan turn on the ignition and put ...

Question about 1991 405

1 Answer

106 w reg electric problem 2000 model with alley head, multi injection. water temp light stays on even when engine is cold,and electric fan runs constantly, even when ignition turned off and key ...

how do I remove the starter in my 205 gti 1990 1.9 L Remove the air filter and battery, undo the 3 bolts that hold the starter on (depending on model they might be under the clutch linkage , one ...

...in the list so i entered peugeot) Combustion gas bubbles in the radiator coolant indicates a blown head gasket. Take it to a radiator shop and get a combustion gas test to confirm. Most likely will ...

...use to reach 80 degrees drained coolant and replaced no temp reaches 98 but blowing cold air The head gasket has gone, is it a 1,6 1.8 petrol? if so its the most common fault on that car. best way ...

...head bank spark plugs removal: 1.2.1. Remove the inlet manifold out from cylinder head. 1.2.2. Disconnect all three ignition coils connectors. 1.2.3. Remove all three ignition coils screws. 1.2.4. ...

Question about 2005 405

1 Answer

...changing them out one at a time this will preclude the possibility of mixing up the wires. If the heads are aluminum, get some anti seize compound while you're at the auto parts store and put ...

Question about 1991 405

1 Answer

Removing_Dash 106 Replacing heater matrix on a Peugeot 106 and need to remove dash. How do I remove it.? Half way the but there must be some bolts hidden can u help? Thanks Hello, this is a French ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

1991 Peugeot 405
1991 Peugeot 405

451 Questions

1990 Peugeot 405
1990 Peugeot 405

103 Questions

2005 Peugeot 405
2005 Peugeot 405

805 Questions

1989 Peugeot 405
1989 Peugeot 405

164 Questions

Manuals & User Guides

Loading...