Questions & Answers for: Hyundai Elantra head removal

HOW CAN I REMOVE THE HEADLIGHTS FOR A NEW PAIR? I NEED REMOVE THE DUST INSIDE OF THE HEADLIGHTS , BUT NEVER SEEN HOW IT WORKS. PROBABLY IT'S NECESSARY REMOVE EVERITHING IN THE FRONT? I DON'T KNOW; ...

Ad

blown head gasket do i need to take cams out or blown head gasket do i need to take cams out or can i just remove the head You technically dont have to remove the cams, but besure to check each one at

Ad

how hard is it to replace a head gasket on a hyundai lantra how hard is it to replace a head gasket compared to say a ford Most head gaskets are straight forward. If you can replace one on a front ...

Question about 2001 Elantra

3 Answers

...removal will destroy the threads in the head and they will have to be repaired. At this point you have two choices. 1. Tighten it up and hope it seats and leave it there. Then a few weeks later take ...

Question about 1995 Elantra

1 Answer

I had my head done on my hyundai elantra 1.6GLS J1 1994 MODEL. We had to take the car back for a retorque on the head on 500km and once again in 1000km and once again in 5000km. Is this really ...

Question about 1995 Elantra

1 Answer

How many screw's need to be removed from the head of the motor in order to remove it? There are 13 of them, and I have already removed 10 of them, but the other 3 remaining are very tight. The car is ...

Question about 1995 Elantra

1 Answer

REMOVAL 1. Drain the coolant and disconnect the upper radiator hose. 2. Remove the breather hose (between the air cleaner and the head cover). 3. Remove the air-intake hose. 4. Remove the vacuum hose,

can the extension tubes from the spark plugs be removed w/o removing the head Why would one need to take out these tubes? I believe they are pressed into the head. I've never had the circumstance ...

...are bubbles coming in the radiater why there are bubbles coming in the radiater can you explin was head was not face properly or there is head gas ket is not good original where is the problemr The ...

...a camera down in the cylinders and check for valve damaged but its hard to see i would go for the head removal i am sure the timing belt jumped and damaged valves were the spark plugs ok or broken ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...