Questions & Answers for: Chevrolet S 10 head removal

Question about 1998 S-10 Pickup

1 Answer

...and push rods (KEEP IN ORDER) remove head bolts Remove head without prying between head and block Send head out for machining or replace with new head Installation in reverse of removal Hope this ...

Ad

good info on removing head on 2.2 chev 4 cyl have Chilton manual (worthless manual) go to autozone.com, click on engine, click on cylinder head; there are 11 diagrams and detailed instructions on ...

Ad

Question about 1988 S-10

1 Answer

blown valve how do i get the head off? On a 2.5 litre Disconnect battery (+) ,remove exhaust manifold, remove intake manifold (leave the throttle body on it) of course valve cover and then head bolts.

Question about 1990 S 10 4WD

1 Answer

changing the head gaskets.i want pictures of the heads. dont know what all i have to remove. I would recommend getting a repair manual if your going to do it yourself. Head bolts need to be tighten a ...

1988 S-10 2.5L- Brand new cyl head & gasket- new radiator- water pump is working and I'm getting air pushing through the radiator. Disconected the upper hose to the rad to see if pump was working ...

Question about 1994 S-10

1 Answer

...head removal would br appreciated.Thanks Frank Leave the exhaust manifold attached and just push it away. Remove the head bolts and make sure all vacuum lines and fuel lines and water lines are ...

...head bolt, rocker arm removal and reinstall torque specs, and what order to remove/install. No check the intake manifold gasket first that is most likely your problem and you don't have to remove ...

where's the head gasket located in 1999 saturn sl1 ?? The Head gasket is between the head with the valves and the Block. If you are planning on trying to remove and replace this on your own I ...

...ball joints on a 2003 chevy s10 4 wheel drive and it has the factory rivits I have removed the top head and the bottom heads of the rivits. How do I get the old ball off? rivets removed, should come ...

Question about 1998 S-10 Pickup

1 Answer

...Head removal & replacement, Timing Chain & gears also ... ? 3:28 https://www.youtube.com/watch?v=CnXtwR1N0Og Apr 28, 2012 - Uploaded by No1hmfic Gibson Head removal & replacement, Timing ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...