Questions & Answers for: GMC head removal

94 GMC sonoma needs head gasket Currently slow leak, no water in oil yet. 4 cyl, 2 WD, manual, looking for pitfalls before I dive into this repair. Thanks! no real pit falls just drain coolant remove ...

how to replace low beam head light how to replace low beam head light you have to either pull out two retaing pins and remove the lamp assembly on one style grill others need the whole grill removed

1999 GMC Surburban 5.7. Head gasket leaking on passenger side. Need step by step info on how to repair Buy a Chiltons or Clymers manual at your local parts store...it will have what you need Also ...

...i will list the most common causes below. Coolant consumption::: Possible causes______ 1. Check the head gaskets. The gasket may be leaking. 2. Check The Intake Manifold Gasket. This gasket may be ...

...head bolt tightening sequence-5.0L and 5.7L engines Removal & Installation5.7L EngineTo Remove: Disconnect the negative battery cable. Drain the engine coolant. Remove the air cleaner assembly. ...

replacing sparkplugs on a 2003 YukonXL 5.3 Litre Here's how to remove the spark plugs. Remove the engine sight shield, if necessary. Disconnect the spark plug wire from the spark plug. â?¢ ...

is it possible to remove the cylinder head without taking off the intake manifold - 1988 gmc 350 fuel injected Hello, anderplan. In order to remove the cylinder head from a V8 Chevy engine, it is ...

head gasket what prcedure is required for this job? do i need to get the heads worked on as well? Hi Darien, If you are removing the heads it is always best procedure to take the heads for ...

1 TORX® head screw (1) in the upper trim cover (2) before removal. If necessary, remove 1 TORX® head screw (1) from the upper trim cover (2). If a screw is not present, remove the upper trim cover (2)