Questions & Answers for: head bolt torque specs 2

...pulling some bolts and replacing some bolts, the only thing that i would recomend looking up would be the torque ratings for the bolts on the turbo, but you'll prolly be able to pull it off no ...

...head bolt torque? Use a torque wrench to tighten the bolts in the following order: Tighten all center bolts to 34 Nm (25 ft.-lbs.). Tighten the four corner bolts to 27 Nm (20 ft.-lbs.). Tighten all ...

need torque specs for head bolts for 2004 PT Cruiser For specs like that I would call the parts counter at your local Chrsler Deal and they will be acurate and glade to help you.

head bolt torque specs on a 2005 pt cruiser with out turbo 2.4dohc 60 ft lbs and after all torque down do a 1/4 turn on all bolt again.

have a2005 pt cruiser with turbo has white smoke come out what could this be Blown head gasket,here's how you repair.Here are the gaskets you will need.Here are your bolts.

I need the camshafts bolt torque specs on 2003 PT Cruiser. I am planning to finish head gasket repair in the morning. Found head bolt specs but not camshafts...help 105 in.-lbs

...entire section on rebuilding the engine and will give you torque specs, camshaft R/R, etc. Hmmm Having to take a camshaft out to put in head bolts does not seem to be one of Chrysler's better

...Head and Cam Bolt Torque specs? - PT Cruiser Forum www.ptcruiserlinks.com > ... > Tech & Performance Forum Nov 5, 2012 - 2 posts - ?2 authors I am putting everything back on after replacing the ...

Torque specs outer tie rod 2002 pt cruiser What are torque specs for outer tie rod Tighten it up using 2 spanners as tight as you can .

...torque specs for 2008 pt cruiser no country told (they are not the same world wide) the car has 1000+ fasteners on it, which one is it. engine if yes tell which one. and what parts of it. I am not ...