Questions & Answers for: Samsung LN hdmi repair

...present using HDMI, component, and RF sources as well as during menu operations. Is there a menu fix or an inexpensive repair? Thank you. Tim It looks like a defective LCD panel, not worth to fix

...HDMI at 1080p from a PC, PS3 or Xbox 360 on any port. 1080i and 720p work better, but also eventually fail. I understand from researching the issue at the AVS Forum I have an older main board and the ...

...HDMI. Resetting the picture, unplugging the power cord, or waiting overnight did not help resolve the problem. I am wondering if the repair costs will be reasonable (less than $200?) or is it time to ...

...repair can be DIY by replacing the main board. All the HDMIs are located in there. If you can find the part that controls the HDMI signals and replace it, it might be a cheaper solution, The IC ...

HDMI quit working Component still works- Possible lighting spike- is this repairable Check and replace damaged component/s in the HDMI section circuit. The maim board might need replacement.

...HDMI processor section circuit should be troubleshooted. Work is a skilled one. Contact any experienced service technician. If you are not familiar with electronics, do not attempt to repair. Whether ...

My Samsung LN40B500P3FXZA LCD HDTV will change from HDMI/CABLE to PC to HDMI BluRay TO AV to CAMCORDER all on its own. The red light would flicker constantly, as if the remote is being used, but that ...

...repair and if it is worth it? If you are using HDMI to connect to your TV try this: 1: make sure is connected properly (give I a wiggle, watch the screen though if it changes colour it can either be ...

...HDMI cables, unplugged all devices etc. On a 32' tv the repair probably wouldn't be worth it after labor costs. They're cheaper to replace with a new one and less of a hassle. Look thru the Settings ...

...hdmi repair HDMI input no signal The first thing you need to do is go into the settngs menu and see if you need to enable it, if there is no such menu setting, you need to change a board on the unit ...