Questions & Answers for: Suzuki GSX-R 600 hard move gear shift 2004

hard and when I try and down shift it sometimes will stick and not find a gear and other times it sounds like it slamming into gear thanks for your help.Mark You need to have your gear box checked, it

Ad

Question about 2001 GSX-R 600

2 Answers

...hard for me to get out of neutral and back into 2nd gear without slowing down alot, is this some sort of safety feature? the bike shifts fine when riding it normal and shifting from first to 2nd gear ...

Ad

hard but I'm not a clutch slipper, only used the clutch on the starts. hi mate try not to use fully synthetic oil use semi synthetic and if its clutch slipping you will tell because when you put it in

Question about 2004 GSX-R 600

1 Answer

...shift pedal is hard to push down and/or hard to lift up, the problem is a bent shift fork. If it feels like it always did, then I have to ask if you have changed oil in the last month or so. Did you ...

...2002 GXSR 600 will only go to first and neutral. You have a bent shift fork. Expensive to repair. Bummer. A bent fork will not move the slider gear properly and that is why the gears will not

...gear shift lever gets stuck When I shift my 02 GSXR 600 the gear shift lever stays in the down position after shifting into 1st and stays in the up position when shifting into all other gears. I can ...

...gear to pull away it seemed to be between gears and took a good prod, also made a not so nice clonk and noise. Now seems to select gears ok, though not been far since. Not sure what to do, or if just ...

...hard push to get it in 1st gear but nothing too serious. But after the rain storm i took it out started it and everything was running until i held in the clucth and threw it into first gear it ...

Question about 2003 GSX-R 600

1 Answer

...gear, shift all the way down to neutral, then shift up 2 clicks. On my Suzuki Boulevard S-50 (VS-800) the shift order is 1st gear down, then up for neutral, 2nd, 3rd, 4th, and 5th. Your crotch rocket ...

...gear, and hold it out to engage the teeth of the clutch shell to keep it from turning while undoing bolt. If you're completely removing starter, undo the wiring going to it. If you just need to move ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...