Questions & Answers for: Jeep Grand Cherokee hard move gear shift 2004

...shift until about 4000rpms from 1st to 2nd gea Hi Everyone. I bought a 2004 Grand Cherokee 4x4 4.0 6 cyl. with select tract transmission. I drove it home and noticed right away that in first gear it ...

...gear does not shift from 3rd to 4th even above 5000rpm. Further gear slips down from 4th (engage/disingage) with noise and High RPM. my mechanic is saying that he has changed three different used ...

...gear shift is stuck in 2 wheel drive and won't shift to 4 wheel how long ago was the last time you shifted it into 4 wheel drive? does the selector move? if not the cable could be locked up, got ...

...gear for 2 seconds and kicks back in). But it only does it on SHARP left hand turns only. It changes gears great and if I shift from 1st, 2nd and drive manually gears change great also. Only sharp ...

...gear. Thanks 2004 grand cherkee doesn't shift and then shifts hard. Only happens when turning left. Sometimes rear tire on drivers side squeels when goes into gear. Thanks You have binding in ...

...jeep reset computer m 2004 jeep wont shift out of first gear i checked the transmission fluid and its good, i notice the battery was going out, would that effect the oem from allowing it to shift? ...

...gear to drive loud hard clunk noise underneath find noise location first. never ignore noise on machines. and 10x that on man movers. 100x that in the air. then scan it. using any obd2 scan tool, a ...

move the Gear Shift while you watch the shift lever on the side on the Transmission that is connected to the Shift Cable. If working properly it you should see the lever move to each gear position. If

...move in drive , Reverse or low. or 2nd.gear in an automatic trans, stick shifts like mine are different. in drive.? right foot pressing hard. if rpm races fast and high , that is transmission slip ...

...GEAR. slipping is also called FLARE or false Neutrals. if the linkage is ok. and levels ok. and you checked fuses then scanned the PCM. you'd know more,, why not scan it. all modern cars must be ...