Questions & Answers for: Acura MDX hard move gear shift 2004

...gear to go in. It shifts up/down/up/down and has a lugging type sound. Some vibrating. If I put in D4, it operates fine, however, it does appear to be shifting hard. The shop says I need new ...

GEAR SELECTOR IN PARK, ONCE I MOVE IT TO REVERSE OR PARK IT CUTS OFF This is the de-tent or kick down cable. Most commonly known as the down shift cable. This tells the transmission when the car needs

...gear. When I depress the brake, I cant move the shifter from park into R,N or any of the D's....what do you think is the problem Take a look at the shift lock. When you depress the brake is there an ...

...gear shift Acura MDX 2002 3.5L V6 ( Transmition ) slow gear shift from 2nd to 3rd and in same time slight higher RPM of engine, it could be selenoid? if so which one? Presently has 108,000 Miles. ...

it is hard to shift between the different gears on my 2004 MDX. what can i do to fix this? you may only need a clutch adjustment if it is a manual

...move the steering wheel back and fourth, left to right to left, etc. If it still won't work, try pulling the key out a tiny bit. If that doesn't work try pushing the key in hard to make sure it's all ...

move up to gear 2, then (3?) or "D", then "N", then "R" then "P" with 15 seconds in between. The whole time your doing this, your holding the brake, and not moving. Your going from the lowest gear you

...shift from 3rd to 4th gear and the engine noise is high. It will shift from 1st to 2nd to 3rd. At the same time the RPM gauge goes up and drops. What could be the problem? Thanks Sound like a problem ...

...2004 model want to change from gear one to gear two. and the rpm will rise to 4000 or more before the gear changes. a then comes a sudden jerking/ skipping Your best bet is to get your transmission ...

hard. Doesn't shift into reverse or past 1st gear. What's wrong? The d5 light blinking, engine light and maintenance light is on. Do I need a new transmission? Have codes from Auto Zone. Might help if