Questions & Answers for: Suzuki hard move gear shift 2004

hard but I'm not a clutch slipper, only used the clutch on the starts. hi mate try not to use fully synthetic oil use semi synthetic and if its clutch slipping you will tell because when you put it in

Ad

...hard to move the gear shift out. You may want to check the gear lock mechanism. This is the one that prevents you from moving from park when you accidentally hit the lever. If that checks out ok, you ...

Ad

Question about 1991 GSX 600 F (Katana)

1 Answer

move the slider gear properly. When that happens, the slider's gear dogs don't engage fully into the slots cast into the driven gears. A rattling noise occurs. When full engagement happens you

...gear hard to shift into neutral without tuning off power to bike. The bike has a slightly bent shift fork. The repair is a pretty major operation and I don't recommend the casual mechanic attempt ...

Question about 2004 GSF 1200 Bandit S

2 Answers

...move clockwise and counterclockwise as the rider pushes the shift lever up or down as needed. Go to an empty parking lot or roadway and start out slowly in 1st gear, slowly gaining speed. Does the ...

Question about 1986 GV 1400 Cavalcade LX

1 Answer

...hard to shift, sometimes I can't get the shift lever to move at all. I can manipulate the clutch lever in and out while exerting pressure on the lever to get it in gear. When the bike is off it ...

Question about 2005 Forenza

1 Answer

...hard out of 1st gear. When it does this it will be stuck in a higher gear 3rd or 4th and wont downshift when you come to a stop. You also cannot manually shift the car. Once the car sits overnight it ...

...move does car take off in 1st ? or is it just moving fast issues>???? cant up shift, cant down shift hard to shift. (blocks) grinds. my wild guess, based on no input is the clutch linkage, was ...

...in? Does it go into any gear with the engine off? Does the shifter just move freely or does it bind up? Did anything happen before it failed like a hard missed shift, or just pulled out of

Question about 2004 VZ 800 Marauder

1 Answer

...Shift fork bent or seized. 4. Gear seized on the shaft. 5. Gear positioning lever binding. 6. Shift return springs weak or broken. 7. Shift return spring pin loose 8. Shift mechanism arm spring is ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Suzuki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Bob G

Level 2 Expert

104 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...