Questions & Answers for: hard move gear shift 2004 ATVs

...it , it acts like its in gear but u can push it and it will move belt drive or chain drive? belt loose, chain shear pin bad ? gears stripped? several reasons here ! hard to say w/o more info

Ad

Question about 2012 Sportsman 800 EFI

1 Answer

...hard to move to and gear Neutral, High, Low and Park. Its very stiff and hard to shift to all of them. Its hard when its off and when its running there is no change either way. I don't know what the ...

Ad

Question about 2004 FourTrax Foreman ES

1 Answer

...hard to shift into anything. Its an automatic. When you go to gear up, it clicks, but will not engage. after awhile it will finally kick in, but to get it back to neutral is almost near impossible ...

Question about 2004 Grizzly 125

1 Answer

...worn out shift forks or worn out engagement dogs on the gears themselves. A professional job. Does it fall out if you hold the gear shift up or down while driving? Take it to your local

...move. Shifts into gear but won't move The first things I would check are seized brakes and then transmission condition/fluids. The auto has 2 clutches I believe. Make sure everything is full on ...

...will not move to the reverse or park position. It goes into high and lie ok as soon as your bike begins to high idle it will not fall into gear you probably will need to set your linkage on your ...

move into reverse or park The lever shifts up into high and low but won't go to reverse or park Check to see if one of the shifter rods behind the side pannel are bent.this usually happens due to lack

Question about 2013 Ranger Crew 500

1 Answer

Hard to shift out of 1st gear Changing transmission fluid didn't help. Thinking may be a belt? Any thoughts hard to shift gears - Polaris ATV Forum www.polarisatvforums.com > ... > Polaris Sportsman ...

...shift more than one gear, in one direction, unless they are moving... the transmission gears have "dogs" that are slightly undercut, designed to keep them in gear, they are numerous on each gear and ...

Question about 2013 Ranger Crew 500

1 Answer

gear when you shift... hard shifting is usually a sign of something wrong.. possibly a bent shift shaft, or worn/bent shift forks. If it is hard to shift, both up and down, in all gears, its more than

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...