Questions & Answers for: Microsoft VISTA hard disk erase

...hard drives and flash drives should be listed under "disk drives", cd/dvd roms should be listed under the corresponding header, and so forth. (note: if the following are hard drives, and show up as ...

...do is format the Hard Disk, (erase it), and run the Windows XP installation from a disc. Note: You will need to purchase a copy of XP from your local retailer. Please rate my solution. Thank you!

...hard drive, and start fresh (or if you have access to one, use a disk utility, like GParted - found in Ubuntu). Should this still provide problems for your startup, then it could potentially be a ...

...hard disk. An I/O status code of 0xC000009C or 0xC000016A normally indicates the data cannot be read from the disk due to a bad block (sector). If you can restart the system after the error, Autochk ...

hard disk. 0xC000009D, or STATUS_DEVICE_NOT_CONNECTED, indicates defective or loose cabling, termination, or that the controller does not see the hard disk. 0xC000016A, or STATUS_DISK_OPERATION_FAILED

hard disk as erasable CD-RW drive (Virtual CD-RW), the converting speed is faster than any other m4p to mp3 conversion programs. Windows Movie Maker is video creating/editing software that is included

...disk" options is on the partitioned Hard drive. If you are using the CD recovery Disk, 1. Turn your computer off 2. Turn on and when you see the white bar loading for the dell bios, press F12 or ...

hard drive is what i think you are asking how to do. You will need a copy of windows... be it XP Vista or Windows 7. Put the disk in, restart your computer and it should say Press any key to

...disk. You need to erase the hard drive the right way, you don't format from NTFS to NTFS to erase a HDD. Here is a free eraser, but you need to burn it to a **** and boot to it so it runs in DOS. ...