Questions & Answers for: Pontiac Grand Prix handle lock

Question about 1996 Grand Prix

1 Answer

...the lock and one for the handle pull the handle rod if it is exposed pull on it / The only way to replace the handle and or lock is to take the door apart/ please rate my response thank you very ...

Ad

...FROZEN HOW DO YOU GET IN AND OUT OF THE VEHICLE? THIS HAPPENED TO ME. I HAD TO REMOVE DOOR PANEL AND CHANGE PLASTIC CLIP FROM INTERIOR PULL HANDLE TO LOCK MECHANNISM A 99CENT PLASTIC PART THAT ...

Ad

...handle assembly. Lock cylinder is retained by a single TORX bolt. Reinstall in reverse. TIP: If you lose or damage any of those black plastic coated nuts, order new ones. They are GM p/n 10067214 and ...

Question about 1995 Grand Prix

2 Answers

...lock) The drivers side handle never seemed to get enough leverage to pull the door rod. The inside handle could. Now for some reason we can't get either the outside or inside handle to open the door. ...

door not locked but handle broke off, car is 96 pontiac grand prix, door not locked but handle broke off, car is running. passenger door is locked. how to get in? You could always break a window! You ...

lock so we can close the door. We tried to roll open latch with a screwdriver but it won't budge from locked position. hold the door handle in the up position as though you were opening the dor at the

...service holes in the door frame. Rotate the lock cylinder as needed for clearance, and pull the handle from the door. Reverse the steps for reassembly. Hope this helped. Thank You for using

...the slot on the upper side of the door handle cylinder housing.  Depress and hold the lock cylinder retainer while rotating the key further clockwise to the stop.4. Pull to remove lock ...

both handles on 1996 grand prix broke how do I replace them handles on side of door, door not locked handles just not working there should be a couple star bit bolts on inside of door behind the ...

handle snapped off and lock mechanism fell out Handle of glove box snapped off and the lock mechanism fell out, glove box is now stuck latched shut with the handle broken out of the housing. improvise

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...