Questions & Answers for: Jeep Grand Cherokee handle lock

Question about 1995 Grand Cherokee

1 Answer

...lock control, but when you pull up on handle, nothing happens. There is no handle on the inside to open, so I guess I am looking for directions on taking off the inside panel (without breaking ...

Ad

Question about 1998 Grand Cherokee

2 Answers

lock does not open. I pull on the handle and nothing happens. had the same problem.hit it right below the latch while pulling on it it will open. Remove the covers, check and clean the system: ZJ-Secc

Ad

...handle is seperated from the lock mechanism so when you pull the handle no function occurs it just pulls aimlessly feel around there should be an arm that has fallen off the handle. it fits into a ...

...and cannot be opemed from the outside neither with key or by switch or interior manual switch. there is a sound when auto switch is activated. can be opened by interior handle. new door lock ...

...handle exactly in the center (same place the key lock is only on the drivers side) Use a quarter inch bit. If you get it right, you can remove the handle assembly and get to the rods that work the ...

Question about 2004 Grand Cherokee

1 Answer

...lock/unlock with the key from the outside. The other doors can only be opened by the inside pulling the handle or flipping it by hand. The tailgate is not able to be locked. The interior lights are ...

Question about 2004 Grand Cherokee

1 Answer

lock posision and will not close how do I free them so I can close the door? use a screwdriver to release the latch mechanism while working teh door handle. Make sure it is all the way open, they have

the entire assembly is being pulled out and you have to press on it, to hold it in place, while pulling on the handle. Make sure to hit open on the power lock a few times before trying this. Good luck

Question about 1998 Grand Cherokee

1 Answer

...handle assembly (black plastic around the pull handle) while at the same time pulling on the handle to open it. Make sure to hit open on the power lock a few times before trying this. Good

...you wind up the tyre until it is tight. To undo the clutch and lower the tyre simply turn the crank handle as it letting it down. Overcome the initial tightness and then it will lower as you turn the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...