Questions & Answers for: Ford Escape handle lock

Question about 2002 Escape

2 Answers

...lock latch in the UNLOCK position. Now LIFT UP outside door handle as if opening. While holding it up with your finger ( no prying ) lift up closed latch. Now you should be able to close your door ...

Ad

...rod. Remove the anti-theft guard. Remove the exterior door handle screw. Remove the exterior handle actuating rod. Remove the exterior door handle lock cylinder cover. Remove the exterior door

Ad

...lock cylinder (if equipped) liftgate window glass liftgate window latch/ajar switch liftgate window glass release handle liftgate latch remote control which consists of the following component: ...

Question about 2001 Escape

2 Answers

...lock cylinder (if equipped) liftgate window glass liftgate window latch/ajar switch liftgate window glass release handle liftgate latch remote control which consists of the following component: ...

...door latch. How do I get it open to try and fix the problem? Did you try pulling the door handle? they normally over ride the lock, also a coat hanger will unlock it so yuo can get tothe door to

...do you get the plastic cover off of the back of the drivers door handle to take out the door handle and lock cylinder they pop out with a little pressure from a flat head, wiggle under lip be ...

Question about 2002 Escape

1 Answer

lock handle moved manually, would not reset, door open handle cable ok. Need to get panel off or recommend. If door panel needs removing, then how? Your rear doors have a child proof safety lock above

...lock. Turn the key counterclockwise one quarter turn. Pull the door handle up until the Escape's door opens. Once the driver door is open, simply open the remaining doors by pulling the interior door ...

...lock is on the radiator support pictured here if the cable has broken grab the lever and move it back use a flash light and get under the truck also it might have snapped inside where you pull on the ...

...lock or handle -and your door lock buttons are supposed to work with out key in ignition ---if not working than you have an internal lock problem either lock rod clips disconnected or broken or wire ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2002 Ford Escape
2002 Ford Escape

1,139 Questions

2001 Ford Escape
2001 Ford Escape

1,083 Questions

2005 Ford Escape
2005 Ford Escape

1,107 Questions

2003 Ford Escape
2003 Ford Escape

900 Questions

2004 Ford Escape
2004 Ford Escape

559 Questions

Manuals & User Guides

Loading...