Questions & Answers for: Kwikset handle lock

Question about Professional Door Lock installation Kit

1 Answer

...i take it off of the door? i have taken the two screws off of the inside but i cannot seperate the handles. I must be missing something. :) Hi I might be able to help but without clarification of ...

Ad

Question about Professional Door Lock installation Kit

1 Answer

...lock We can get the handle off but not the disk that is located against the door itself where we presume that screws are located to tighten the lock set My Kwikset door handle is very loose also. I ...

Ad

Question about Brz Sgl Cyl Deadbolt

1 Answer

...handle is loose. Tighten all screws on lock to a firm tightness. DO NOT OVER TIGHTEN as to bend the lock casing! Snug only. Use powered graphite to inject into lock and add to key working it back and ...

Question about Professional Door Lock installation Kit

2 Answers

lock by the circular flange next to the door. Push it in until you feel it give and pull out on the handle at the same time. If you need more help please contact me. Best of Luck, RSMITH972278 Using a

Question about Professional Door Lock installation Kit

2 Answers

...lock and handle back on to door and reinsert the key. Turn key clockwise and push.... remove key. Hope this Helps, RSMITH972278 P.S. PLEASE RATE MY ASSISTANCE this is my first time ever of trying to ...

Question about Professional Door Lock installation Kit

1 Answer

have a kwikset bathroom door handle. Want to put on a new one. I took screws off but handle won't come off. How do I release the handles? Wiggle the backset a few times while pulling on one side or ...

Question about Professional Door Lock installation Kit

1 Answer

...handle to open the door you have to turn it back the other way yourself, it doesn't go back on it's own. The knob in the middle that you turn to lock the door is also very stiff. hole in the door is ...

Question about Brooklane Venetian Bronze Entry Lever feat SmartKey 740BRL

1 Answer

...Kwikset lever handles are held on with hex set screws. A wrench is included in the package. It's either a 3/32" or 2.5 mm. Note that the lock must be unlocked to remove or install the outside

...handle with all your weight while pushing the wire into the hole. (That's why I use the strong Gorilla Hook wire!) You know you have the retainer (and not some fixed part of the lock that happens to ...

through the hole in the door and links the outside lock to the inner handle. You can see it in the upper image here https://www.amazon.ca/Wright-Products-VK333X3BL-TIE-DOWN-BUTTON/dp/B0002YWQFQ?th=1 .

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Kwikset Lock and Locksmithing Experts

vince

Level 3 Expert

2530 Answers

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

Are you a Kwikset Lock and Locksmithing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...