Question about Fastening Systems No.43OOO1N SLP20 Brad Nailer/Case
Senco SLP20 not working We have a Senco SLP20 which is a few years old. When attempting to shoot gun, it will fire once and then air is hissing through top vent and piston has not retracted. I have ...
Question about & Frame Pro 702xp Framing Nailer
...be my problem, since this seems to have the same symptoms. When the magazine is full of nails the gun will respond like it is down to the five and shut down with the air hiss warning. After two to ...
Question about & Frame Pro 601 Framing Nailer
...of lubrication. Lack of lubrication builds up crud inside. Take the 4 Cap screws off the top of the gun (pay attention to how stuff comes out or you screwed). Carefully, turn the gun over and let the ...
Question about & Frame Pro 601 Framing Nailer
The Senco SFN-1 gun will drive one nail and then not retract The gun will drive one nail and then the driver pin will not retract back up in the gun. sounds like time for a rebuild i do this once a ...
...rings are damaged or hardened from age, it will leak air from the top or around the trigger. If the gun is more than a couple years old and gets frequent use, I'd also recommend replacing the lower ...
Question about FP620 Framepro 602 2" - 3 - 1/2" Full Round Head Nailer
Senco Framepro 602 has air coming from the top of the gun when the trigger is pulled and will not shoot the nails. Sounds like the bar that slides down to push the nail is jamed you should disconect ...
...It also is breaking up staples as it try to advance then as you are stapling It sounds like the gun is working properly but is having feeding problems. First, make sure you are using the proper ...
Question about & Frame Pro 601 Framing Nailer
...sound of air release or the hammer trying to actuate. ???? Time for good relube of all the orings with white grease or silicone paste. If no air is leaking then no need to replace orings. This occurs ...
Question about & Frame Pro 601 Framing Nailer
...sound but no firing of nails . You get air release from top of gun Could be just a lack of lubrication in the headvalve /orings or the safety foot is not pushing in the trigger pin all the way. Easy ...
Question about 4D0001N Framepro 502 Framing Nailer
not depress it to fire the nailer. I do not get leaking air sound. Check the manual if you have a safety switch. Also check for any bent nails inside the gun. Make sure all is OFF before investigating
Usually answered in minutes!
9 Questions
7 Questions