...wire from the turntable in there and tighten it hand tight. If it has no ground terminal on the receiver you can always just loosen a screw on the back and connect it there. Make sure the ground wire ...
sound problems on my turntables I have my turntables hooked up to a sherwood receiver and they worked great. Recently I have been having a problem with the volume and quality of sound, no matter how ...
turntable to the aux jacks but have to turn the volume up very loud just to get poor sound The Aux function is not meant for that purpose.The turntables/Record Players being way too old,now a days the
wire from the Turntable hooked up to the receivers ground terminal? it's a screw down silver nut and should be next to the Phono input. You are just lacking a ground from the turntable to the receiver
...turntable connection is not working. I've got a bad hum with the ground wire attached to the screw on the receiver and a worse hum when I disconnect it. I had the turntable checked and it's not the ...
...wire plug in? im wondering if i can connect my turntable to the receiver but im not sure where to hook the ground cable from my turn table in If your receiver has a metal cabinet you can use any of ...
turntable If your turn table has a ground wire with the R and L wires then you can not connect it to this receiver. Unless you have a switch on the turn table that chooses between internal or external
Usually answered in minutes!
192 Questions
173 Questions
140 Questions
146 Questions
92 Questions