Questions & Answers for: Stanton grounding wire turntable

wiring cartridge can you tell me how to wire the red,green,white,blue and black wires coming from the cartridge into the inside of the unit. i have soldered the wires in pairs on the circuit board ...

...grounding for the decks. How can i solve this problem? your mixer should be grounded by the power cord, and the decks have a seperate ground wire which connects, usually on a screw terminal, to the ...

grounding wire was attached to red and white cables. Rca cables? when i look online I can't seem to find any with grounding wires attached? does this matter or can I just use separate grounding cables

...grounding wire. They buzz when I have them on my table, is there anyway to ground them? These units are ground inside the decks. If you pop all the screws and remove the bottom, you'll notice where ...

TurnTable left channel no signal I recently aquired a stanton str8-80 from a friend. Turns out the white rca coming from the deck isn't sending a signal. I'm a newbie to turntables, is there some way ...

...grounding wire problem since I was missing one on that side. However, I just got one, screwed it in, and nothing has changed. Please help troubleshoot! Could it be my cables? Or is it something wrong ...

...turntable is connected to the grounding post on the receiver. Also check all wires from the rca jacks to the stylus for continuity and make sure they are all connected properly at the stylus head. If ...

...are red white with a grounded pit on them HI, use both of them. The white one is the left channel and the red one is the right channel. The 3rd wire is a grounding wire. Cheers John. ...

...Turntable ground wire? i recently bought a second hand Stanton STR8-100 Turntable and it has a constant hum like it is not grounded when it is on. i could not find any kind of ground wire on it. i ...

When connected to Denon 2808ci receiver i get humming noise.Since there is no ground wire to connect,how do get rid of the hum? Sometimes the earth lead in the power cord can be the cause, either ...