...green, and try again. The camera may be full. Check the picture counter on the display panel. Erase some pictures, or transfer the pictures to your computer and then erase them. Make sure your ...
Why do my pictures look too dark? Why do my pictures look too dark (underexposed)? You may need to use the flash. Make sure the setting is not flash off. If you're using the flash, make sure your ...
Question about PhotoPC 3100Z Digital Camera
Can I use the IAS with video clips or TIFF formatted pictures? Can I use the Image Authentication Software (IAS) with video clips or TIFF formatted pictures? No. IAS only supports pictures with ...
Question about PhotoPC 500 Digital Camera
What are high resolution and standard resolution? All pictures have 24-bit pixel depth, or 16 million colors at 144 dots per inch. The high resolution setting produces a standard size photo, 4.44" x 3
I can't take a picture with the camera. What should I do? The camera may be full. Check the picture counter on the display panel. If the camera displays "00" the camera is full, erase some pictures or
Question about PhotoPC 550 Digital Camera
The "picture remaining" number on the display panel does not decrease after you take a picture or record a message. Why? The camera is operating correctly. The total number of pictures you can store ...
Question about PhotoPC 650 Digital Camera
picture have yellow/green color cast. The colors in my picture have a yellow or green color cast. When you take pictures under certain artificial lighting conditions- such as fluorescent, incandescent
Picture blurry or out of focus. My picture is blurry or out of focus. Make sure your subject is within the camera's range. You should be at least 31 inches away to take a picture without the flash, ...
My picture is blurry or out of focus. ake sure your subject is within the camera's range. You should be at least 20 inches away to take a picture without the flash, and 20 inches to 8 feet away to ...
My picture is too light. My picture is too light (overexposed). If you're using the forced flash setting, it may be too bright. Try setting the flash to Auto. If you're facing a bright light source, ...
Usually answered in minutes!
36 Questions
33 Questions
25 Questions
14 Questions
14 Questions