...parts you need. To get into the service mode press #*C* on your copier keyboard. Press 24 and the green key. Press 7 and the green
...exposure button. When you do this all the indicator lights will turn off. Now input "24", press the green start button, input 07, and press the start button again. Now turn the copier off and back on ...
...keys as follows: [#] key → [*] key → [C] key → [*] key To cancel the test command mode, press the [CA] key. Press 26. Press the green button. Press 36. Press the green button. Press ...
...sharp 4400 Press menu 3 to enter the entry mode, then press either the right arrow key(next to the green start key) or the # key to scroll to date and time then press start. I'm sure you can finish ...
...(do this in quick sequence order, the display should change, then enter below) Main code {22} -> (Green Copy Button) Start key -> Sub code {07} -> (Green Copy Button)Start key Press the "CA" button ...
green light will blink twice if you perform this procedure correctly. Aim Tune In at your TV and press Power. Your TV should turn off. If it does not, repeat steps 2-5, trying each code listed in step
bypass tray for A3 or any tray which can also be adjusted to take A3.To adjust the tray, extend the green lever to the place indicated as A3 on the tray then load paper and on the control panel or key
...keys in sequence the display should go blank. Then key in 24 as if to make 24 copies. Then press Print (Green Button) Then key in 7 as if to make 7 copies. Press print again. You should now get ...
...keys in sequence the display should go blank. Then key in 24 as if to make 24 copies. Then press Print (Green Button) Then key in 7 as if to make 7 copies. Press print again. You should now get ...
...tv power supply ok ,but no EHT ,the power LED are glowing red light press program key to change green light to return in few miniutes to standby in red light position ,please to help of rectivied ...
Usually answered in minutes!
1,105 Questions
603 Questions
557 Questions
331 Questions
354 Questions