Questions & Answers for: golf 3 manuals Cars & Trucks

...golf heater fan settings 1-3 not working but 4 does. Can anyone help? The fan will only work on the higest setting but does not work on the lower setting. I can hear the A/C kicking in when you move ...

...3 vw golf well its the handle on the left side you should just pull on it. On this car de choke isn't manually controlled... If you get the cold hard start, and run smooth afterwards... You need to ...

Golf and its gone into safe mode. I have the security code but the manual is missing so I don't know the steps to reset it. Cn you help. The number buttons on the stereo change the code, so push the 1

...torque setting for front hub nut on a mark 3 golf vr6 Need to know the torque procedure for tightening the hub nut? 195 ft-lbs I verified this in the Volkswagen repair manual aka the vdubbers ...

...hold the switch forward as it will not click on.. i have a mark 3 1996 golf it sounds like the switch is bad. I assume it is pull for "flash to pass" and push for high beams. Check your owner

...GOLF 3 TDI with A/C my car is 1992 If anyone have any ideas pleas send me email at [email protected] always Im loking at google I can't find any Service & manual repair thanks for help try ...

...Golf: Firing Order: 1-3-4-2 Cylinders: (back of engine) 1---2----3----4 (front of engine) Let me know if this helped or if you have additional information or questions. Feel free to contact me at ...

...3 golf. im unable to obtain a manual and iv got no idea of any torque settings or the tightening sequences? also is there ant thing i should look out for or avoid? thanks manuals an specs and be had ...

golf mk 5s drivers side door it doesnt lock neither dois it unlock! i can only lock it or unlock it by doing it manually with the key. however the other 3 doors lock and unlock with the key! whats the

...3 cylinders, and dumps a lot of fuel in clouds of grey smoke. Fuel filter, plugs, HT leads, temp sensor, fuel pressure and even the ECU has been professionally tested but the fault is still there. My ...