Questions & Answers for: go gear

I have a 1984 honda vf1000 motorcycle and 2nd gear is going do I have to replace all the gears or just 2nd gear Replace gears in sets, the bad gear and the gear it meshes with. In what way is 2nd gear

go into gear easy.. if you are going into gear then give gas and it slipps out of gear and fluid is good sounds like bands.. tranny time....if hard to go into all gears possible vac mod... if just one

...syncro which why the clutch is in puts the gear in sync. so it wil go into gear. they tend to go after years of use. first gear or reverse are usually the first to go because they get the most ...

...go to second gear. if that is easier the syrcromesh is going. on down gear, try moving to neutral, rev the engine a bit in neutral and then change to second gear if this work then also sign that ...

...go into 3rd gear until i'v done about 3/4 mile then it will go into 3rd gear when i start my bike up in the morning or when i finish work i can get into 2nd gear but wont go into 3rd gear until ...

gear but the down shift it is hard to get in all the time. Have to go over to second as if I am going to do it then back over to third and sometimes it will go into it. What could be the issue? sounds

...go to other gear (e.g. 2nd gear) while standing still (clutch pedal still pressed) and then go to first gear, it also engages normally. I am using a Nissan Livina 2008. Sounds like something with ...

...transmission. Is it auto manual? Does it go into gear and just go in reverse or wont go into gear.. Check linkage for binding if it just wont go after putting in gear it is trans problem..good

MAN TGA can't shift Gear to high only 4 gears r working vehicle is not going in higher gears I had change gear lever Yes I can going to see higher gears to change gear lever

...shift will move but will not go into gear Gear shift will move but will not go into gear You can rock the car & it will unlock & go into gear try this.... How to Release Shifter thatis Stuck in ...