Questions & Answers for: gmc yukon missing

missing I have a 2001 Yukon XL that has a bad miss in the engine after it warms up. Works like a charm when it is running cold. May want to check fuel pressure regulator to do this start truck and ...

GMC Yukon battery replacement I removed the negative and positive terminal connections, but cannot lift the battery out. What am I missing? there should be a hold down on the bottom of the battery The

gmc yukon i filled the gas tank up yoday and when i started it up it only idled at about 400 rpms and i i didnt notice anything until i got of work and the service engine soon light keeps flashing and

GMC Yukon aft door will not lock. I have 1999 GMC Yukon aft door will not lock. I have looked at the door connectors - there are five brass buttons on frame side and only four brass plates on the door

...GMC 5.3L Yukon PO300 Multiple Cylinder Misfire Detected on 2001 GMC Yukon 5.3L...recommendations? Do it yourselfer... TRY LUCAS OIL,I USED A FULL LITRE FIRST,WILL LET YOU KNOW HOW IT WORKED.BEFORE ...

gmc yukon xl and do not have an owners manual, cant find what i need to change a flat, need advice as to where on the car it should be located Don't know precisely on that vehical but it should be

...filter located on my 1993 GMC Yukon Look under the vehicle on the drivers side on the inside of the frame rail right under the drivers front seat just ahead of the transfer case. You can't miss

GMC Yukon has code C0561 stability/ traction comes on Also misses on cylinder 3 and 7 Could be bad coils on 3&7,if not can be module,try to swap coils if will show the same number that mean MODULE

...gmc yukon 5.7 hesitation/misfire when driving. It shakes but if you move the gas peddle it smoothes out only to miss and shudder again. Have replaced plugs, cam sensor MAF sensor. Could it be a ...

...GMC Yukon Denali 5.7l no start. New plugs wires cap royor I'm crank sensor cam sensor fuel spider fuel pump. Help!!!!!! Have you confirmed that its not a security issue? Did it die suddenly or was it ...