Questions & Answers for: gmc mode door actuator

GMC- Blend actuator quit working after battery was replaced. Will now work only on defrost mode. Have tried the reset options suggested by others including disconnecting battery and removing HVAC fuse

...gmc envoy Removal & InstallationBlazer, Jimmy, Xtreme & BravadaThe mode actuator is located on the top left side of the HVAC module.Disconnect the negative battery cable. Remove the knee ...

...GMC Acadia SLT: A/C only comes out at my feet even after trying to switch positions. Dealer said the entire dashboard console has to be removed to access the lever that's currently stuck in the mode ...

...GMC SIERRA base model. Not getting air to the floor. (Air or Heat) Replaced the control unit with very little change. The motor for the blend door works fine. Could it be the blend door its self or ...

...GMC, Buick, Pontiac, ... Mode/Temperature Door Actuators May Fail : Pontiac ... remove glove box assembly to access actuator. press the helpful button link below may help How To Install Replace AC ...

...GMC Envoy with a 5.3 engine There are no vacuum lines for the HVAC , electroniclly controlled . Mode Actuator The mode actuator is an electronic stepper motor with feedback potentiometers. The HVAC ...

blend door is banging on a 2004 gmc envoy and air flow does not transfer from defrost to vents or defrost to floor That's the mode door , not blend door . electric actuator motor is bad . replace it .

where is the mode door and the electric actuator motor located on a 2004 GMC ENVOY SUV GMC Envoy HVAC actuator Replacement

...bad , this actuator controls where the air comes out , vent , defrost , floor etc...... May have video on youtube . MODE DOOR ACTUATOR REPLACEMENT 1999 GMC Denali mode door or actuator stuck or ...

...gmc Yukon AC blowing through my defroster vents only Not vacuum controlled , has electrically controlled mode door actuator . Mode Actuator The mode actuator is a 5 wire bi-directional electric motor ...