Questions & Answers for: Amana glow

glow rod goes on does not ignite burner glow rod turns on burner does not ignite then glow rod shuts off drum keeps spinning You need a coil kit for the valve.

...the top cover plate inside the oven. Now with the door open turn the oven on does the hot surface glow? If it doesn't glow then you have a bad igniter and needs to be replaced. What ever you do ...

Oven does not heat. Glow bar ignitor glows but no flame. I set the oven, it heats to 100, sometimes higher, but does not get up to temp. The glow bar ignitor glows but a flame does not catch. What ...

Dryer does not heat up I hear gas flowing when the igniter starts to glow but the gas doesn't ignite. Is it the igniter? do you see the igniter glowing if so it is probably the thermocouple if the ...

Glow plug works and is very bright What tells the gas valve to turn on in the oven after the glow plug comes on Current. When the glow plug gets hot enough the rectangular plugs draw about 3.6 amps as

arg7600 oven won't light. Glow plug works. No gas. This typically indicates the Hot surface ignitor (glow plug) is weak, and needs to be replaced. Even though it glows, it simply doesn't generate the ...

...sometimes. The gas line is ok. I think it may be the electronic ignitor? it could be the igniter or glow coil as it is sometimes called. if it is glowing orange in color it may only be igniting once ...

I have an Amana Dryer Model # LGD20AW and when the dryer is first turned on the glow plug will heat up and ignite the gas but as the dry cycle continues the glow plug will heat up but no flame will ...

glow bar is glowing but gas dosnt come on Hi, Just because it glows that does not mean it is not bad... The ignitor is not working right and is going bad.... have the repair man replace the ignitor, ...

ignitor glows but short cycles Checked air flow, nothing seems to be clogged. Ignitor glows for about 30 seconds and occasionally blows a flame, but then stops. Mostly ignitor glows and blows no flame