Questions & Answers for: geo prizm brake light

...lights won,t go off in my 1993 geo prism. The brake lite switch is most likely stuck on, it is on the arm that goes to the brake pedal, it will have at least 2 wires in the connector to the

brake lights 1999 GEO PRIZM BAKE BRAKE LIGHTS STAYS ON WHEN THE IS RUNNING replace th brake light switch

My 1996 Geo Prizm rear lights stay on even though the vehicle is turned off. When I step on the brakes, the lights do not turn brighter but stay the same brightness. brake light switch

my brake lights won,t go on in my 1993 geo prism I would check the brake light fuse and the brake light switch under the dash on the brake pedal lever. And, of course, check the bulbs themselves.

...geo prizm? Brake Light Switch The brake light switch is located at the top of the pedal arm. It is the switch which turns the brake lights on when the brakes are applied. The plunger type switch is ...

...geo prizm ebrake light is on. Is this a faulty sensor? I heard it could have an brake indicator wire that makes contact with to let you know youre pads need to be changed. Your brake pads don't have ...

...geo prizm, battery light and brake light in the dash stay lit when you start the car. The car still runs fine just the dash warning lights stay on. The alternator was replaced maybe three years ago, ...

...geo prizm brake lights only work when car is off My 1990 Geo Prizm's brake lights only work when the car is off. Tail lights, turn signals, everything else is fine. This includes the light in the ...

...geo prizm brake light comes on when I start to stop and turns off when I stop You need to replace the brake light switch, it is located above the brake pedal and is actuated by the brake pedal

...Geo Prizm is illuminated, but I can't sense ay problem with the brakes. The care stops, and there's no noise. What gives? The brake warning light tells the driver the parking brake is ...