Questions & Answers for: Brother MFC gear

...Email: [email protected]. Thanks. John. OK.. I agree that your problem is with the flag gear. However, there is a specific location in which it needs to be situated. The purpose of the ...

Fuser Gear Md No. LJ 7416 Hi Guys. I was given this all-in -one unit, "if you can fix it, it's yours" senario. I've pulled appart the fuser and found two problems. The LJ 7416 gear has snaped in three

Brother 8840 Fuser Roller Gear The black rollers that pull the paper through the fuser and onto the output tray are attached to a gear. The rollers broke off the gear and I'm wondering if that part is

gear that drives the fuser unit hi there! this all started with paper jams and grinding noises. i have opened up the printer and found the problem wich was fuser unir gear was smashed so i have chaned

Gear Racheting Noise Disassembled back and side of unit - grey driver gear that drives the fuser appears to be stripped. Is that gear available - how do you remove that gear? Fuser gear appears to be ...

...or is it remanufactured? The toner cartridge for this model is the TN-350, which has a "flag gear" on the left (gear) side. It is a little plastic piece that sticks out on the new cartridges ...

...and still the same problem, then i removed the toner and loosened the two screws on the left by the gears then removed the cover of the gears. Right at the back there is a funny looking gear with a ...

what is flag gear? Link Hello, Flag gears tell the printer when it is out of toner these gears are missing in most "starter cartridges". Hope you can buy this at above link. Thank you.

...cartridge installed and it still says tonner life ended The toner cartridge in this machine has a gear assembly that resetting the "toner empty" light, it is build in a way that after resetting the ...

fuser open message not a broken gear Get fuser open message. Will print several sheets then error - red light green light. Removed fuser unit brown gear not broken (no gears broken) gears turn easy. ...